Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Amplifier Covers Up to 2.5 GHz

August 25, 2008 11:38 am | Product Releases | Comments

Link Microtek’s 1119 solid-state amplifier module operates in a frequency range from 500 MHz to 2.5 GHz in military mobile jamming systems to counter the threat of IEDs. The 188 × 91 × 27 mm component utilizes GaN transistors to achieve an output of 50 W, operates from a 28 VDC supply and includes built-in control and monitoring circuits....

Power Inductors Present High Inductance

August 25, 2008 11:38 am | Product Releases | Comments

Taiyo Yuden’s NR6028 Series of wire-wound power inductors have an inductance range from 0.9 to 100 µH in a 6 × 6 × 2.800 mm package. The devices offer a DC resistance range from 0.013 to 0.600 Ω and current ratings from 0.620 to 6.600 A. The inductors are appropriate for DC/DC converter choke coil applications in LCD and plasma TVs as well as other flat panel displays....

Temperature Sensor and Thermostat Uses EEPROM

August 25, 2008 11:38 am | Product Releases | Comments

Maxim Integrated Products’ DS7505 digital temperature sensor and thermostat integrates EEPROM nonvolatile memory for power-up with a user-defined configuration and thermostat thresholds. The device provides ±0.5000ºC accuracy over its entire supply voltage range over a temperature range from 0ºC to 70ºC and ±2ºC max accuracy over its full operating temperature range from -55ºC to 125ºC....

Advertisement

Gain Block Amplifiers Cover 4 GHz

August 25, 2008 11:38 am | Product Releases | Comments

Hittite Microwave’s HMC636ST89E and HMC639ST89E GaAs pHEMT MMIC gain block amplifiers perform in automotive, broadband, CATV, cellular/3G, WiMAX/4G and fixed wireless applications from 50 MHz to 4 GHz. The HMC636ST89E delivers 13 dB gain, 40 dBm output IP3, and noise figure of 2.2 dB while being rated from 200 MHz to 4 GHz and consuming 155 mA....

Termination Operates from DC to 4 GHz

August 25, 2008 11:38 am | Product Releases | Comments

BroadWave Technologies’ Model 552-306-005 5 W termination performs from DC to 4 GHz at 50 Ω. The device offers a maximum VSWR of 1.150:1 from DC to 1 GHz, 1.200:1 from 1 to 2 GHz, 1.250:1 from 2 to 3 GHz and 1.300:1 from 3 to 4 GHz. The termination measures 1.530” long from the connector, 0....

Antenna Mounts to Window or Wall

August 25, 2008 11:38 am | Product Releases | Comments

Astron Wireless Technologies’ 3 dBi omni directional dipole antenna exhibits the ability to mount to an indoor window or wall via screw holes in the base of the legs or Velcro pads. The ½”-diameter and 4.5” to 8.5”-long component presents a power handling capability of 10 W, vertical polarization with an elevation pattern of 60º and 360º in azimuth and a VSWR of 2....

L-Band VCO Yield Low Phase Noise

August 25, 2008 11:38 am | Product Releases | Comments

Z-Communications’ CLV1750A-LF L-band VCO yields a typical phase noise of -104 dBc/Hz at 10 KHz offset and typical 2nd harmonic suppression of -15 dBc. The RoHS-compliant component operates from 1,690 to 1,810 MHz with a tuning voltage range from 0.50 to 4.50 V DC and a typical tuning sensitivity of 50 MHz/V....

Sensor Supports Mobile Display Digital Interface

August 25, 2008 7:57 am | Product Releases | Comments

OmniVision Technologies’ OV3647 0.25" 3 MegaPixel image sensor supports the mobile display digital interface (MDDI) that operates at 15 fps in QXGA (2048 × 1536) resolution. The 1.75-micron OmniPixel3 device features user control over image quality, format and output data transfer as well as a standard parallel interface, which acts as an input for a secondary camera, so it can share the MDDI interface while functioning as an MDDI hub....

Advertisement

ICs Provide Four Output Voltages

August 25, 2008 7:57 am | Product Releases | Comments

Micrel’s MIC2811/21 power management ICs provide four output voltages for system core, I/O, SDRAM, NAND flash, and Secure Digital (SDIO) with LDO regulators and a DC/DC converter. The 3-mm² device can supply two LDO regulators that operate from an independent input supply at 1.65 V and an input range from 2....

Oscilloscopes Operate from 1.5 to 6 GHz on Four Channels

August 25, 2008 7:57 am | Product Releases | Comments

LeCroy’s 700Zi Series WavePro digital oscilloscopes provide 1 MW ? and 50 W ? input capability in bandwidths from 1.5 to 6 GHz on four channels with ?4 V offset capability and ?3 V common mode control. The instruments have a sample rate of 20 and 40 GS/s interleaved as well as a record length of 10 Mpts/ch standards and up to 128 Mpts/ch optional....

Fuses Fit for Electrical Ballasts

August 25, 2008 7:57 am | Product Releases | Comments

Littelfuse’s 208/209 Series 350-V 2AG-size fuses are designed for electrical ballasts used in fluorescent lighting and other applications. The RoHS-compliant devices have an interrupting rating of 100 A at 350 V AC. The UR-, CE-, and PSE-approved fuses are lead free and are available as a cartridge or with axial leads....

Analyzer Shows Live RF

August 25, 2008 7:57 am | Product Releases | Comments

Tektronix’s SA2600 real-time spectrum analyzer uses DPX waveform image processor technology to show a live RF view of a spectrum in analog and digital transmissions. The handheld device has a frequency coverage range from 10 kHz to 6.2 GHz, real time bandwidth of 20 MHz, and a displayed average noise level (DANL) of 153 dBm....

GPU Delivers up to 1G Pixels per Second

August 25, 2008 7:57 am | Product Releases | Comments

ARM’s Mali-400 MP scalable multiprocessor graphics processing unit (GPU) delivers up to 1G pixels per second in from one to four processors. The device uses MPCore technology for system bandwidth, performance optimization, and power consumption. The GPU is well-suited in applications such as mobile feature phones and 1080p-based iDTVs....

Microwave Amplifiers Use RF Technology

August 25, 2008 7:57 am | Product Releases | Comments

Cree’s CMPA0060005 and CMPA2560025 GaN monolithic microwave IC (MMIC) amplifiers use RF technology to form fully-?integrated amplifier circuits that replicate on a single silicon carbide (SiC) substrate. The wideband-distributed CMPA0060005 operates from DC to 6 GHz and provides up to 5 W CW RF output power and an operating voltage range from 28 to 48 V....

Boxes Feature Dual-Channel Gasket Construction

August 25, 2008 7:57 am | Product Releases | Comments

Bud Industries’ ANS Series die-cast NEMA boxes feature a dual-channel gasket that is made with a one-piece molded outer silicone gasket and a wire-mesh with sponge rubber. The EMI/RFI-shielding devices meet NEMA 1, 2, 4, 4X, 12, 13, and IP65 ratings. The ADC-12 aluminum-alloy boxes measure 0.098" (2....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading