Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Flip-type Connector Designed for Flat Panel Display Applications

January 14, 2008 4:30 am | Product Releases | Comments

FCI develops a 0.4 mm pitch flip-type ZIF connector suitable for optical disc drives and flat-panel display applications. Designated the GLH series, the connector is available in pick-to-board, panel-to-board and board-to-board connections. The GLH provides 0.4 mm spacing, a height of 1.2 mm with an FPC thickness of 0....

Axial Optical Isolators

January 14, 2008 4:30 am | Product Releases | Comments

TT electronics OPTEK Technology develops a series of axial optical isolators using plastic optical fiber. Designated the OPI1270 series axial fiber optic isolators, the devices are constructed using a visible red LED emitter and a phototransistor detector in separate opaque molded plastic modules, linked by a shrouded optical cable that shields the optical signal from dust and other contaminations....

Software Upgrade

January 14, 2008 4:30 am | Product Releases | Comments

Tektronix, Inc. announces that its TDSHT3 software has been upgraded to support the HDMI compliance test specification version 1.3b. The Tektronix TDSHT3 software now supports all of the HDMI compliance test procedures as per the latest CTS1.3b document. Tektronix now supports physical layer compliance test solution per the CTS 1....

Advertisement

Electrostatic Discharge Protection Family

January 14, 2008 4:30 am | Product Releases | Comments

ON Semiconductor introduces a member of its ultra-low capacitance, electrostatic discharge protection family of devices. The ESD9L is a single line ESD protection device that offers 0.5 pico farad (pF) capacitance and low clamping voltage. Available in a small package for ESD protection, this part is suitable for safeguarding high speed data lines in portable applications such as cell phones, MP3 players, PDAs and digital cameras....

Controlled Variable Gain Amplifiers

January 14, 2008 4:30 am | Product Releases | Comments

Hittite Microwave Corporation announces a family of dual mode digitally controlled variable gain amplifiers (DVGA) for microwave radio and military applications that operate in the frequency band of DC to 6 GHz. These innovative digital variable gain amplifiers are a suitable choice for use in cellular infrastructure, test and measurement or military radio systems where an accurate signal level control and a low noise figure contribution is...

Positive Control Switch

January 14, 2008 4:30 am | Product Releases | Comments

Hittite Microwave Corporation announces the release of a 40 W GaAs MMIC positive control T/R switch for cellular/3G, TD-SCDMA, private mobile radio and automotive telematics applications from 0.1 to 2.1 GHz. The HMC646LP2E is a low loss, high linearity GaAs MMIC 40 W switch that provides exceptionally high P0....

New Option Bridges the Gap between Design and Manufacturing

January 14, 2008 4:30 am | Product Releases | Comments

Virage Logic Corporation’s Self-Test and Repair (STAR) Memory System now includes capabilities to address the challenges of advanced design and process technologies. A dashboard of user-selectable options enables tradeoffs between test time, area, and state-of-the-art diagnostics for optimal design complexity management....

Wound Delay Lines

January 14, 2008 4:30 am | Product Releases | Comments

Link Microtek has added a selection of wound delay lines to the range of products designed and manufactured by the company’s engineering division. Covering applications over a broad frequency range of 30 kHz to 2 GHz, the delay lines are manufactured from semi-rigid cable and have a tinned copper outer, a copper-silver plated steel inner and a PTFE dielectric....

Advertisement

High-performance, Lightweight Cables

January 14, 2008 4:30 am | Product Releases | Comments

Tyco Electronics announces that it has extended the M/A-COM family of high-performance, lightweight cables to include five cable types covering a variety of outer diameter sizes and constructions. The M/A-COM FA20RXLW, FA29RXLW, FA46RXLW, FN49RXLW and FN52RLLW augment the successful FN34RXLW cable line and are suited for use in electronic defense, launch vehicles, commercial aviation, space/satellites and other general purpose military appl...

Single Channel and Diversity Down-converters

January 14, 2008 4:30 am | Product Releases | Comments

Skyworks Solutions announces that several of its single channel and diversity down-converters, including the SKY73032 and the SKY73021, have reached volume production with the industry’s leading infrastructure OEMs. Skyworks’ highly integrated solutions, which are a part of its rapidly growing linear products portfolio, support GSM/EDGE, CDMA, WCDMA, WiMAX and long term evolution applications, offer a wide range of RF frequencies, and lever...

VCO Operates from 1600 to 3200 MHz

January 14, 2008 4:30 am | Product Releases | Comments

Crystek announces the CVCO55CW-1600-3200 VCO which operates from 1600 MHz to 3200 MHz with a control voltage range of 0.5 to 20 V. This VCO features a typical phase noise of 㫵 dBc/Hz at 10 KHz offset and has desirable linearity. The Model CVCO55CW-1600-3200 is packaged in the industry standard 0....

High-speed Pulse Width Modulator

January 14, 2008 4:30 am | Product Releases | Comments

Microchip Technology Inc. announces the MCP1631 2.0 MHz, high-speed pulse width modulator. The highly integrated device contains a 1 Ampere (A) integrated MOSFET driver, high-speed comparator for over-voltage protection and both battery-current and voltage-sense amplifiers in one small package....

Addition to Analog Power-management Family

January 14, 2008 4:30 am | Product Releases | Comments

Microchip Technology Inc. announces the latest addition to its analog power-management product family—the MCP1602 switching regulator. The 2.0 MHz, 500 mA switcher has a power-good feature that indicates when true voltage regulation has been achieved, ensuring reliable system behavior. With both adjustable and fixed output voltages, as well as auto transition from pulse-width-modulation (PWM) to pulse-frequency-modulation (PFM) modes, the s...

Reflective Object Sensor

January 14, 2008 4:30 am | Product Releases | Comments

OPTEK Technology develops a cost-effective reflective object sensor with three different lead options. Designated the OPB609 Series, the sensor consists of an infrared LED and NPN silicon phototransistor mounted side-by-side on parallel axes. Typical applications for the reflective object sensor include assembly line and machine automation, machine safety, end-of-travel sensing and door sensing, as well as edge, paper jam and mark detection...

High-performance ADC Portfolio

January 14, 2008 4:30 am | Product Releases | Comments

austriamicrosystems introduces the AS1538 — an I²C interfaced ADC with power consumption in the µA range, expanding austriamicrosystems high-performance ADC portfolio. The AS1538 combines low-power operation, maximum possible conversion speed for I²C and fully-differential or single-ended analog input modes together with outstanding dynamic performance (THD 㫣dB) in a 16-pin TSSOP package....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading