Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Keyboards Featured on Dual Output Function Generators

September 8, 2008 6:45 am | Product Releases | Comments

Protek Test and Measuremet offers its Model B8040FD DDS function generator. This high stability direct digital synthesis dual-output function generator has less than -54 dBc (Sine wave) harmonic distortion and a keyboard for rapid entry of waveform parameters. It delivers 40-ppm long-term and 1-ppm short-term stability; it generates waveforms including Sine, Square, Pulse, Triangle, exponential up and exponential down, Ramp, Sine (x) x and ...

ESD Protection Portfolio Features Ultra-Low Capacitance Technology

September 8, 2008 6:45 am | Product Releases | Comments

ON Semiconductor announces the expansion of its high performance off-chip ESD protection portfolio with the introduction of the ESD7L5.0D and the NUP4212. They use a propriety integrated ESD protection platform which enhances clamping performance while maintaining low capacitance and small die size....

Two-Element Capacitor Array Reduces Surface Area

September 8, 2008 6:45 am | Product Releases | Comments

Murata Electronics North America introduces its 1-µF 0.9 × 0.6-mm two-element capacitor array. Suitable for reducing surface area and mounting costs, the 0302-sized capacitor array has the 1-µF static capacitance. This model is well suited to be a decoupling capacitor for mobile phones, PCs and digital audio visual equipment....

Advertisement

Wireless Integrated Circuits Perform in Management System

September 8, 2008 6:45 am | Product Releases | Comments

Lansdale Semiconductor, Inc. announces single-source rights to three wireless integrated circuits (ICs) originally designed and built by Freescale Semiconductor, Inc. Lansdale will globally market and manufacture Freescale’s product lines that includes MC1350 intermediate frequency (IF) amplifiers, MC1490 radio frequency (RF) commercial amplifiers and MC1590 intermediate frequency (IF) defense/military/aerospace amplifiers....

DSA Line Features Serial-Addressable Control Interface

September 8, 2008 6:45 am | Product Releases | Comments

Peregrine Semiconductor Corporation releases three 7-bit UltraCMOS digital step attenuators to complement its 50-? DSA line. These HaRP-enhanced devices offer a serial-addressable control interface which allows the user to control up to eight different DSAs using a common three-wire interface bus....

Power Measurement Kit Replaces Attenuators

September 8, 2008 6:45 am | Wireless Design & Development | Product Releases | Comments

MECA Electronics, Inc. introduces its MFK-PMK-1 Power Measurement Kit that replaces high power attenuators as a means of reducing RF signal levels into sensitive power meters. Directional couplers have low insertion loss and high directivity, so that the sampled power is stable and isolated from changes as power levels increase....

Heptaband External Wireless Antenna Offers Seven Frequency Ranges

September 8, 2008 6:45 am | Product Releases | Comments

Laird Technologies, Inc. announces its ultra-flexible Heptaband External Wireless Antenna that exhibits optimal radio transmission characteristics while supporting seven bands in one profile. The seven antenna bands operate simultaneously, providing performance across Cellular Quadband GSM, UMTS/3G, GPS and WiFi/WLAN frequencies....

Wideband SMT MMIC LNA Covers 18 to 31 GHz

September 8, 2008 6:45 am | Product Releases | Comments

Hittite Microwave Corporation announces its SMT MMIC wideband low noise amplifier (LNA) which covers test and measurement equipment, microwave radio and military EW applications. The HMC519LC4 GaAs pHEMT MMIC LNA is rated from 18 to 31 GHz, and it delivers 14-dB gain, a 3.5-dB noise figure and 24-dBm output IP3....

Advertisement

Non-Reflective MMIC SP4T Covers DC to 18 GHz

September 8, 2008 6:45 am | Product Releases | Comments

Hittite Microwave Corporation announces its GaAs pHEMT SP4T (single pole, four throw) MMIC switch which is suitable for automotive, industrial sensors, test and measurement, microwave radio, military and space applications from DC to 18 GHz. The HMC641 is a wideband, non-reflective SP4T switch that exhibits insertion loss of 2 dB and isolation of 42 dB at midband and it features an on-chip binary decoder which requires only two control line...

3.3 V HCMOS Oscillators Feature Tighter Stability Options

September 8, 2008 6:45 am | Product Releases | Comments

Fox Electronics offers HCMOS oscillators with 3.3 V operation and tighter stability options of 15 ppm (F537), 10 ppm (F539) and 8 ppm (F53S). The F53 series is suitable for applications where better stability and noise characteristics are needed such as in test and measurement equipment, communication equipment and data transfer....

TCAS Switches High Frequency RF Signals

September 8, 2008 6:45 am | Product Releases | Comments

The D2-729B003 SPDT from Ducommun Technologies, Inc. switches high frequency RF signals between the top and bottom fuselage-mounted antennas and numbers 1 and 2 systems transponders. The switch is directly applicable to all TCAS systems such as Honeywell and Rockwell/Collins. Features include a weight of 11....

Bluetooth IC Ready for Automotive Production

September 8, 2008 6:45 am | Product Releases | Comments

CSR announces the enhancement of its BlueCore4-ROM Plug-n-Go automotive Bluetooth silicon with Bluetooth v.2.1 functionality. BlueCore4-ROM Plug-n-Go is a Bluetooth chip that adheres to both the AEC-Q100 automotive stress test qualification and Bluetooth v.2.1, enabling OEMs to easily create feature-rich, in-car multimedia systems....

TOPICS:

Programmable Gain Amplifier is Optimized for DOCSIS 3.0

September 8, 2008 6:45 am | Product Releases | Comments

ANADIGICS, Inc. launches its ARA2017 programmable gain amplifier that is optimized for DOCSIS 3.0 cable modem and E-MTA applications. This device supports high linear power levels which enable channel bonding and thus higher data rates in the cable system upstream (return) path. The amplifier is integral to the performance of DOCSIS 3....

32-bit ARM-Based Radio Module Lowers Power Consumption

September 8, 2008 6:45 am | Product Releases | Comments

CEL expands its line of IEEE 802.15.4 transceiver systems with the addition of the FreeStar Pro 32-bit ARM-based ZigBee radio module. Based on the Freescale MC13224V 32-bit ARM Platform-in-Package (PiP), the FreeStar Pro leverages the processing capability of the MC13224V with its low power consumption....

PLL/Synthesizer Line Comes in a Space-Saving Package

September 8, 2008 6:45 am | Product Releases | Comments

Crystek Corporation introduces its CPLL66 family of complete PLL/Synthesizers that needs only an external frequency reference and supply voltages for the internal PLL (phase lock loop) and VCO (voltage controlled oscillator). The CPLL66 is programmed using a standard three-line interface (data, clock and load enable)....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading