Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Molded Sockets

April 29, 2004 10:06 am | Product Releases | Comments

Advanced Interconnections introduces 1.00 mm pitch BGA sockets in precision molded wafers. The sockets are molded in-house from high temperature thermoplastic. Benefits include reduced insertion and withdrawal forces and coplanarity within .006 inches. The full grid wafers are pin loaded to the footprint specified and are available in any footprint specific pattern up to 26 × 26 rows, to accommodate a BGA, LGA, or CSP device as large as...

Power Amp Modules

April 29, 2004 10:06 am | Product Releases | Comments

Anadigics introduces a family of HELP (High-Efficiency-at-Low-Power) CDMA linear power amplifier modules. The AWT6137 AMPS/CDMA and AWT6138 PCS/CDMA PA modules reduce handset power consumption, delivering an efficiency of 20% at +16 dBm. The devices' design utilizes mode switching to take advantage of high efficiency operation over a range of output powers....

Mobile IP Testing

April 29, 2004 10:06 am | Product Releases | Comments

Spirent announces that its APEX C2K Applications Performance Test Platform can automate 1X Mobile IP testing, allowing for repeated evaluation of MoIP capable wireless devices in the lab environment. With MoIP, end-users have greater flexibility. For example, they can retain a wireless IP address and continue streaming wireless data, while changing service regions or air interface technologies....

Advertisement

PA Modules

April 29, 2004 10:06 am | Product Releases | Comments

RF Micro Devices introduces its family of linear power amplifier modules for CDMA applications, including 3 V IS-95/CDMA 2000 1X handheld digital cellular equipment and spread-spectrum systems. Measuring 3 × 3 × 0.9 mm, the RF3163, RF3164, and RF3165 PA modules are manufactured on a GaAs HBT process and are based upon RFMD's patent pending Lead Frame Module (LFM) packaging technology....

CDMA Power Amps

April 29, 2004 10:06 am | Product Releases | Comments

SiGe Semiconductor announces silicon-based CDMA power amplifiers. The amplifiers, SE5103L, SE5106L, and SE5107L, feature integration with on-chip digital or analog bias control, as well as an integrated power detector,2.8 V regulator, all matching and harmonic tuning. The RangeCharger amps feature linearity of <㫊 dBc at a peak output power of +28 dBm, and a power added efficiency (PAE) exceeding 41%....

Low Noise Amp

April 29, 2004 10:06 am | Product Releases | Comments

CEL announces the availability of NEC's SiGe LNA IC, the UPC8211TK. Originally developed to serve as a first stage low noise amplifier in GPS receivers, the higher frequencies make the device a suitable LNA for other products as well: cell phones, cordless phones, WLL, and SRW applications to 2....

Dual Op Amp

April 29, 2004 10:06 am | Product Releases | Comments

STMicroelectronics introduces a dual operational amplifier designed for industrial and automotive applications including hall sensor compensation coils, servo amplifiers, and motor drivers. The TS982 operates at supply voltages ranging from 2.5 V to 5.5 V and offers up to 200 mA of output current on each amplifier at supply voltages down to 2....

DACs

April 29, 2004 10:06 am | Product Releases | Comments

Maxim introduces the MAX5732-MAX5735, 32-channel, 16-bit digital-to-analog converters (DACs). They integrate 32 individually buffered, 16-bit DACs into a 8 × 8 mm, 56-lead QFN package. These devices eliminate the need for external output amplifiers, filters, or capacitors. Applications include automatic test equipment (ATE), optical networking, and data acquisition....

Advertisement

Test System Enhancements

April 29, 2004 10:06 am | Product Releases | Comments

Spirent announces enhancements to its CDMA2000 Performance Test System, a system that combines carrier-scale Mobile IP testing, high-volume application traffic, and roaming/mobility simulation in a single application package. The system's features provide service providers and network equipment manufacturers (NEMs) with testing versatility and automation....

CompactPCI Module

April 29, 2004 10:06 am | Product Releases | Comments

ACT/Technico introduces a storage solution with a 6U single slot disk module for CompactPCI based systems. The field-replaceable CPCIStor is designed to support boot strap, application load, and data storage in a single slot making it suited for use in communications environments. The module, which can ship with up to three 2....

Lead-Free Cables

April 29, 2004 10:06 am | Product Releases | Comments

Tyco Electronics announces the availability of Madison Cable brand lead-free and heavy-metal-free cables. These cables are designed with several national and international environmental initiatives in mind, including Proposition 65 in the state of California and additionally, WEEE and RoHS directives, taking effect in 2006 in the European Union, which address lead and heavy metals....

Loop Fastener

April 29, 2004 10:06 am | Product Releases | Comments

Micro Plastics introduces the Loop Fastener. This "U" shaped blind fastener is designed for installation of pipes or cables on a wall or ceiling. Simply drill a 1/4 inches diameter hole, then slip the fastener over the wire or tube and push into the drilled hole. These fasteners are molded in natural colored high density Polyethylene, and will accommodate wires or cables up to 1/4 inches in diameter....

Coaxial Detector

April 29, 2004 10:06 am | Product Releases | Comments

Elcom Systems announces the availability of a zero bias coaxial RF detector model CD-51-N/(conn.sex). It comes with male or female type N input and femal BNC output connectors. The unit features a replaceable and reversible schottky diode, 35 pf output capacitance and 0.5 mV/uW sensitivity. The maximum VSWR is 2....

Tri-Sector Antenna

April 29, 2004 10:06 am | Product Releases | Comments

Kathrein's 800-10270 tri-sector antenna system provides a site antenna solution in a 9 inches low visibility envelope. Its cross-polarized vector dipole design offers the same performance as 3 Kathrein cross polarized panel antennas, and features adjustable electrical down tilt, either manual or by optional remote control....

Dual Band Coupler

April 29, 2004 10:06 am | Product Releases | Comments

Kathrein is now shipping its updated KC1009A dual band combiner/crossband coupler. The product allows a wireless carrier with operations in both the 806 to 960 MHz band and the 1710 to 2170 MHz band to share a single feedline. The KC1009A is suitable for use either indoor or outdoor locations and is wall or tower mountable....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading