Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Thermal Sensor features 2 SMBus™ Serial Ports

October 11, 2006 11:51 am | Product Releases | Comments

Maxim Integrated Products introduces the MAX6638, a ±.0°C accurate thermal sensor with two independent SMBus™ serial ports. The dual SMBus interface allows a GPU card controller and a CPU board controller access the temperature data of the GPU chip and graphics card, thereby eliminating communication errors....

5 W Power Amplifier for WiMAX Basestation Applications

October 11, 2006 11:22 am | Product Releases | Comments

Z-Communications, Inc. announces a high linearity power amplifier (5 W average) for emerging 802.16 WiMAX basestation applications. The first in the series of power amplifier products for WiMAX, the ZPA3436-5W, operates over 3.4 to 3.6 GHz band with the typical gain of 46 dB and 37 dBm OFDM output power for 64 QAM, coding, 3....

Oscilloscope Helps Locate Problems Faster

October 11, 2006 11:22 am | Product Releases | Comments

LeCroy Corporation introduces three oscilloscope models that expand the bandwidth of the WaveRunner Xi and WaveSurfer Xs product lines. LeCroy is also launching WaveScan™— an advanced search and analysis feature — as standard on all WaveSurfer Xs and WaveRunner Xi oscilloscopes. WaveScan provides the ability to locate problems faster by going beyond hardware triggering, and integrating advanced algorithms to continuously scan fo...

Advertisement

High-speed SERDES Serial I/O Capability

October 11, 2006 11:22 am | Product Releases | Comments

Lattice Semiconductor Corporation announces the LatticeECP2M™ FPGA family, offering high-speed embedded SERDES I/O plus a pre-engineered Physical Coding Sublayer (PCS) block. Based on the LatticeECP2 low cost architecture, the LatticeECP2M family has been developed on advanced 90 nm CMOS technology utilizing 300 mm wafers....

Module for Wireless Sensor Networking

October 11, 2006 11:22 am | Product Releases | Comments

RF Monolithics’ DM2200 combines low-power consumption components and RFM’s Third Generation Virtual Wire™ radio to provide longer range than was previously possible with a battery-powered mesh networking node. The DM2200 is an embedded module that communicates 600 meters in open air while consuming 4....

Bluetooth & UWB – A Future of Unlimited Possibilities

October 10, 2006 10:49 am | Product Releases | Comments

By Tom Siep Bluetooth® and Ultra-Wideband-enabled devices offer enhanced capabilities that will make possible new applications and change the way people collect information. There are many ways to exchange information between personal devices. Cell phones, laptops, PDAs, MP3 players and desktop computers all have increasingly large click to enlarge Figure 1...

Second Generation Antenna

October 10, 2006 9:00 am | Product Releases | Comments

...

Power Input Module

October 10, 2006 9:00 am | Product Releases | Comments

Tyco Electronics Power Systems, Inc. announces its PIM300 series, a 300 W power input module designed to comply with the Advanced Telecom Computing Architecture (ATCA™, AdvancedTCA™) specifications. PIM300 is targeted for high-density, high-performance ATCA boards with up to 300 W power....

Advertisement

Grid Array

October 10, 2006 9:00 am | Product Releases | Comments

Aries Electronics offers a new ball grid array (BGA) to BGA adapter which resolves soldering issues that arise when BGA devices with RoHS-compliant solder balls are assembled with other devices whose connections are not lead-free. This adapter solves solder joint reliability problems that occur when the lower reflow temperatures used for standard tin-lead eutectic solder balls cause the incomplete reflow of the lead-free solder balls....

Single-instrument Unit

October 10, 2006 9:00 am | Product Releases | Comments

Anritsu Company introduces CDMA2000® 1X support for its MD8470A Signaling Tester, creating a highly integrated single desktop instrument product in which user equipment (UE) developers and network operators can ensure CDMA2000 1X and PPP signaling and application performance. The MD8470A CDMA2000 1X option is based on a CDMA2000 network simulator, using a Perl-based scripting API as its primary interface for performing system configurati...

X-band Antenna

October 10, 2006 9:00 am | Product Releases | Comments

mWAVE Industries, LLC announces model number RPS2P2-80-S. This antenna is a light-weight and highly portable transmit/receive 2 feet diameter cassegrain X-band antenna. The antenna is designed for military satellite communications operating in the 7.25 to 8.4 GHz frequency band. This antenna can transmit and receive on each port for either LHCP or RHCP senses of polarization without having to rotate the OMT or a polarizer....

Transmitter IC

September 8, 2006 7:26 am | Product Releases | Comments

CML Microcircuits’ CMX998 Cartesian feedback loop transmitter IC provides global two-way radio manufacturers with a highly integrated solution for transmitter linearization. The device covers an RF range from 100 MHz to 1 GHz, usable with channel bandwidths up to 150 kHz. Suited to the majority of non-constant envelope modulation systems, the CMX998 is suited for today's flexible, multimode Software Defined Radio (SDR) systems, significantl...

Two Single Chip Solutions

September 8, 2006 7:26 am | Product Releases | Comments

Pericom Semiconductor Corporation announces the launch of two single-chip products that support USB 1.1, USB 2.0 full speed, USB 2.0 high speed and high fidelity audio signals, captured on a 3.5 × 1.5 mm TDFN packaging. The devices are suited for handheld applications, including mobile phones and MP3 players....

Wireless under the skin!

September 7, 2006 12:29 pm | by Farhad Mafie | Product Releases | Comments

From implanting a passive Radio Frequency Identification (RFID) microtransponder under the skin to implanting an active drug-delivery system in human bodies, various types of wireless technologies are being used or being implemented in new products to further improve some of the ongoing challenges within the healthcare industry –that eventually would result in overall better patient care....

Increasing Features and Reliability in Wireless Mobile Devices

September 7, 2006 11:45 am | Wireless Design & Development | Product Releases | Comments

Remember when the mobile phone was called a bag phone? This was a major accomplishment at the time. Then manufacturers began the miniaturization of the phone and they became smaller than a cigarette pack. The size reduction drove the market for new phone sales. People changed phones every two years so they would have the smallest device....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading