Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Multi-channel A/D Converter

May 2, 2005 6:09 am | Product Releases | Comments

Linear Technology introduces the LTC1867L, a 16-bit, 8-channel, 175 ks/s, 3 V supply analog to digital converter. The converter draws 2.7 mW MAX at full speed. The power automatically drops at reduced speeds, typically 0.9 mW at 50 ks/s. This device maintains good DC performance providing 16-bit no missing codes over temperature and ± 3 LSBMAX INL....

GPS Receiver and Cell Modem

May 2, 2005 6:08 am | Product Releases | Comments

WinSystems introduces the PCM-GPS, a PC/104 module that adds both GPS and cell modem support on a single card. The GPS receiver provides complete position, velocity and time information while the cell modem supports standards-based multi-band GSM/GPRS and CDMA. This board is suitable for both fixed and mobile applications that require navigation, tracking, data logging, timing and/or communication functions....

High Pass Filter

May 2, 2005 6:08 am | Product Releases | Comments

The 4HPD-2000/A18000-SR from Lorch is a broadband bi-directional high pass filter. The filter features a 1 dB typical cut off of 2000 MHz. The insertion loss is 1....

Advertisement

Time Correlation Application

May 2, 2005 6:08 am | Product Releases | Comments

Agilent introduces a time correlation application that provides a seamless integration between Agilent's Windows® XP-based logic analyzers and its real-time oscilloscopes. The Agilent E5850A gives designers the ability to capture real-time oscilloscope signals with up to 13 GHz bandwidth, correlate them to key digital signals on their logic analyzer — including a 1....

Optical Module Option

May 2, 2005 6:08 am | Product Releases | Comments

Agilent announces an 8X Fiber Channel measurement capability, using the 86105C high-sensitivity, broad-wavelength multi-rate optical module and 83496A multi-rate clock recovery module for the 86100C Infiniium digital communications analyzer (DCA-J). The combination provides test-system flexibility and coverage for new rates as they emerge....

Dual/Quad DACs

May 2, 2005 6:08 am | Product Releases | Comments

Maxim introduces the MAX5108/MAX5109 (dual) and MAX5115/MAX5116 (quad) nonvolatile, rail-to-rail, buffered, 8-bit D/A converters (DACs). These devices have a high-speed two-wire I(2)C interface that accepts data rates up to 400 ks/s. The devices are also guaranteed monotonic over the full operating temperature range....

SAW Filter Family

May 2, 2005 6:08 am | Product Releases | Comments

TriQuint introduces a family of GSM/GPRS/EDGE SAW filters in a 1.5 × 1.5 × 0.76 mm package. These filters (p/n 856441 [GSM850], 856387 [GSM900], 856409 [DCS], and 856417 [PCS]) enable designers to achieve a good noise figure. Reliability is assured by full hermeticity within the SAW packages....

PLL Circuit Design Tool

May 2, 2005 6:06 am | Product Releases | Comments

Analog Devices releases a new version of its phase-locked loop (PLL) circuit design and evaluation tool. ADIsimPLL™ Version 2.7 features enhanced synthesis and simulation capabilities, as well as expanded libraries and Web access. This version supports simulations of all key non-linear effects that impact PLL performance....

Advertisement

Silicon Oscillators

May 2, 2005 6:06 am | Product Releases | Comments

Linear Technology announces a family of silicon oscillators, the LTC6905-xxx, generating a fixed frequency clock output from 20 to 133 MHz. These oscillators provide a timing solution for FPGAs, CPLDs, microprocessors and DSPs. The family features a consistent startup (100 us typical), low duty cycle variation (± 2....

RF Connector

May 2, 2005 6:04 am | Product Releases | Comments

Corning Gilbert announces a push-on, high-performance, microwave interconnect system. The G3PO connector can be used in radar systems, telecommunications and wireless basestation equipment, satellite systems, antenna arrays, etc. The connectors support increased package density with center-to-center spacing of 0....

Broadband Cable and Antenna Analyzers

May 2, 2005 6:04 am | Product Releases | Comments

Anritsu introduces the Broadband Site Master S810D/S820D cable and antenna analyzers that provide wide frequency bandwidth, allowing for the detection of faults in cables and antennas used in wireless backhaul and defense applications. The models, which cover 25 MHz to 20 GHz (S820D), provide increased frequency coverage, performance and functionality in a portable instrument....

Splitter Series

May 2, 2005 6:04 am | Product Releases | Comments

Rugged construction and good performance across all wireless bands from 0.8 to 2.7 GHz make these splitters from MECA suitable for in-building wireless systems. Easy installation with unobstructed access to connector ports for large coaxial cables with no additional mounting hardware. Available in two-way and three-way, Type-N or SMA-Female configurations....

EV-DO Services

May 2, 2005 6:04 am | Product Releases | Comments

Spirent Communications™ announces its APEX C2K: SC platform for automated testing of EV-DO applications. This product provides a platform to perform signaling conformance testing on EV-DO capable mobile devices and to verify the robustness of EV-DO subscriber applications. The platform automates test cases from TIA-919 (3GPP2 C....

28-Lead QLFP Package

May 2, 2005 6:04 am | Product Releases | Comments

Kyocera announces an open tooled, high performance 28-lead QLFP (Quad-Lead-Flat-Package) for millimeter-wave frequencies. This surface mountable package features a Cu/Mo heat sink, kovar seal ring, gull wing leads and both differential and single-ended RF ports. It has good electrical performance characteristics up to 40 GHz, and the cavity will fit most 3 or 4 mm devices....

Voltage Divider

May 2, 2005 6:04 am | Product Releases | Comments

Providing military and aerospace analog design engineers with a two-element resistor network in a 1206 chip package, TT Electronics IRC Advanced Film Division has developed a military voltage divider that provides two matched resistors with absolute and ratio tolerances on a single chip. The D1206 series is composed of two TaNFilm® tantalum nitride resistors on ceramic substrate, packaged on a standard 1206 size chip....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading