Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

RoHS-Compliant SSOP Adapters

March 13, 2007 12:50 pm | Product Releases | Comments

Aries Electronics introduces an RoHS-compliant version of its SOWIC-to-DIP Correct-A-Chip™ adapter that can be used for prototyping and testing SSOP ICs. This adapter allows the use of 0.65 mm pitch surface mount ICs in thru-hold designs, and it can be cut to smaller sizes by the end user....

Half-Bridge Gate Driver ICs

March 13, 2007 12:50 pm | Product Releases | Comments

Fairchild Semiconductor introduces its high-voltage gate driver ICs (HVIC), he FAN7383, FAN7384 and FAN73832, that feature a common-mode dv/dt noise-canceling circuit for achieving noise immunity. These HVICs are designed for driving MOSFETs and IGBTs in an array of consumer and industrial applications up to 600 V....

Dual Down-Converter

March 13, 2007 12:50 pm | Product Releases | Comments

Hittite Microwave Corporation introduces an integrated, high IP3 dual down-converter RFIC which is designed for use in wireless infrastructure applications from 800 to 960 MHz, including those based on CDMA, WCDMA, GSM, GPRS and EDGE standards. The HMC581LP6(E) is comprised of two identical down-converter channels including high IP3 mixers, and LO and IF amplifiers....

Advertisement

Microwave Frequency Counter/Analyzers

March 13, 2007 12:50 pm | Wireless Design & Development | Product Releases | Comments

Pendulum Instruments announces its CNT-90XL family of Microwave Frequency Counter/Analyzers with integrated power meters, covering up to 60 GHz of frequency range. It is a CW counter with burst capabilities, offering high resolution and measurement speed. The measurement speed for power and frequency is up to 250,000 frequency samples....

High-Power Broadband Switch

March 13, 2007 12:50 pm | Product Releases | Comments

The 50S-1530 broadband switch from JFW Industries is a 1P2T solid-state switch that is capable of handling 50 W of RF power from 20 to 2,500 MHz. Designed for applications where precision and reliability are critical, it has low insert loss (1 dB typical/1.5 dB maximum) and low VSWR (1.4:1 maximum)....

High Power Amplifiers

March 13, 2007 12:50 pm | Product Releases | Comments

AR RF/Microwave Instrumentation expands its line of 4G11 solid-state broadband amplifiers that cover the 4.0 to 10.6 GHz frequency range. The Class A 4G11 family now includes six units that deliver 1, 5, 10, 20, 40 and 80 W of power, all designed to provide performance over the 4.0 to 10.6 GHz range....

2 W Power Amplifier

March 13, 2007 12:50 pm | Product Releases | Comments

M/A-COM, a business unit of Tyco Electronics, announces the MAAP-007649-000100, a 2W power amplifier for the 800 to 1000 MHz frequency band. Its design displays optimum performance for RFID reader applications with greater than 1 W DRM (Dense Reader Mode) spectral mask linearity and a flat gain response....

Miniature Coaxial Switch

March 13, 2007 12:50 pm | Product Releases | Comments

Teledyne Relays has announced its Series CCR33K miniature coaxial switch that is designed for frequencies from DC to 33.5 GHz. This latching single-pole, double-throw (SPDT) electromechanical switch offers an insertion loss repeatability of ± 0.1 dB across the full bandwidth. On narrow band applications, the insertion loss repeatability can be as good as ± 0....

Advertisement

Multi-Band Frequency Synthesizer

March 13, 2007 12:50 pm | Product Releases | Comments

EM Research introduces its MBS-500 Multi-Band Frequency Synthesizer which is a wideband frequency source designed for use in RF test and measurement applications. Covering the frequency range of 100 to 500 MHz in a single unit, this synthesizer features step size of 100 KHz, output power of +14 dBm and phase noise of less than 㫷 dBc/Hz at 10 KHz offset....

ISM Band Transceivers

March 13, 2007 12:50 pm | Product Releases | Comments

Sirenza’s series of ISM Band Transceivers are fully-integrated 2FSK transceivers that include a complete receiver, transmitter and synthesizer on a single chip. The series includes the ML2722 (900 MHz), the ML2724 (2.4 GHz), the ML5800 (5.8 GHz) and the ML5824 (2.4/5.8 MHz). These transceivers are designed for simple ease-of-use with a minimum of external components and no tuning/alignment....

Radio Transceiver Module

March 13, 2007 12:50 pm | Product Releases | Comments

Radiometrix introduces its BiM3B radio transceiver module that is an enhanced higher-power replacement for the BiM3A-869-64. Two frequency variants are available within the European unlicensed SRD band. One offers 5 mW of output power (with no duty cycle restriction), and the other can produce a 25 mW output (with a 1% duty cycle restriction on 868....

I/O Connector System

March 13, 2007 12:50 pm | Product Releases | Comments

FCI has announced its Pwr TwinBlade™ connector system that is designed for cabling applications in equipment with high power demands like wireless base stations, aDSL and vDSL equipment, servers and storage devices. This system provides current-carrying capacity of up to 50 A per contact....

Card-Edge Connectors

March 13, 2007 12:50 pm | Product Releases | Comments

FCI develops press-fit, card-edge connectors to enable the implementation of MicroTCA™ (mTCA) architecture. These vertical card-edge connectors provide 170 contacts on 0.75 mm pitch, and they enable AMCTM cards to be plugged directly to a backplane, accommodating speeds up to 10 Gb/s. The press-fit version of the connectors extends the use of MicroTCA architecture to thicker backplanes where the size and complexity of the backplane is n...

Hybrid Socket Adapter

March 13, 2007 12:50 pm | Product Releases | Comments

Advanced Interconnections Corp. announces its hybrid socket adapter design that uses both male and female pins in an interstitial pattern in 0.65 mm pitch BGA and LGA footprints. The patented design features the reliability of screw-machined terminals with multi-finger contacts in a compact SMT socket....

Near-Infrared Power Laser

March 13, 2007 12:50 pm | Product Releases | Comments

Dilas releases a near-infrared (NIR) emitting 60 W continuous-wave (CW) power laser at 808 nm and 980 nm from a single 19 emitter bar. Available in the industry-standard (25 325 mm) conduction-cooled package, this easy-to-integrate, high-brightness, multimode diode laser is an appropriate pump source for solid-state lasers used for medical and industrial applications....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading