Advertisement
The Source on Design and Technology for the Wireless and RF Engineer
Subscribe to Wireless Design and Development All
View Sample

FREE WDD Email Newsletter

Dual-Band MIMO Antennas Address 802.11n Systems

February 27, 2009 11:46 am | Product Releases | Comments

Laird Technologies’ S245112PT directional and S24517PT sector dual-band external MIMO antennas are intended to enhance the latest generation of WLAN technology systems in the 2.4 to 2.5 GHz and 5.1 to 5.9 GHz bands. The devices contain 3 MIMO antenna elements, each of which is connected to the WLAN access point via a low-loss, coax pigtail....

Wire-Wound Power Inductor Offers Highest Rated Current for Size

February 25, 2009 10:46 am | Product Releases | Comments

Taiyo Yuden (USA) Inc. announces the availability of its RL3225 series of compact, low profile, wire-wound chip inductors for switch-mode DC/DC converter applications in digital cameras, portable games, hard disk drives and other high-current-use devices. Measuring 3.2 mm × 2.5 mm with a 1.7 mm maximum height, the seven models in the BRL3225 series offer an impressive combination of high current and inductance and low DC resistance (R...

Software Radio PMC Module

February 25, 2009 10:46 am | Product Releases | Comments

Pentek, Inc.'s Model 7153 digital down converter (DDC) is a 4-channel, high-speed digitizer PMC module designed for processing baseband RF or IF signals from a communications receiver. Four of these 200 MHz, 16-bit monolithic A/Ds in the front end of the Model 7153 deliver a previously unattainable combination of speed and resolution....

Advertisement

Diagnosis Technology Slashes Debug Effort for Complex SystemVerilog Assertions

February 25, 2009 10:46 am | Product Releases | Comments

OneSpin Solutions has mainstreamed comprehensive formal assertion-based verification (ABV) for SoC, ASIC and FPGA designs by delivering a structured, step-by-step approach to its use and adoption. This approach is enabled by five interoperable products in a new, integrated 360® MV product family designed for formal verification novices, experienced users, and experts....

LNA Combines Low Power, High Gain Performance for Mobile Wi-Fi Applications

February 25, 2009 10:46 am | Product Releases | Comments

At 5.8 GHz, NEC's low noise NESG4030M14 HBT delivers 11 dB of gain at a low 2 V/6 mA bias, making it appropriate for battery-powered products. Fabricated using NEC's latest 140 GHz fMAX UHS4 SiGe:C process, the NESG4030M14 also offers 80 V (MM) of onboard ESD protection. Although not usually found in front-end LNA devices like the NESG4030M14, this protection is critical to the safe and reliable operation of mobile Wi-Fi products....

The Stimulus Package — What's in it for the Tech Industry?

February 25, 2009 10:46 am | Product Releases | Comments

Nancy Maas Editor-in-Chief As I write this editorial column today, the economic stimulus plan created by President Obama and Congressional Democrats to revive the economy is being debated in the House. If the bill becomes law, the proposed $825 billion package of spending and tax cuts would allocate billions of dollars for tech projects to improve our nation's infrastructure, improve healthcare, education and government funding, ...

500 W Combiner Performs from 2 to 200 MHz

February 25, 2009 10:46 am | Product Releases | Comments

Pulsar Microwave's Model No. PP2-18-450/22N combiner delivers 500 W to the sum port over the frequency range from 2 to 200 MHz. The 5Ω × 3Ω × 1.5Ω device demonstrates insertion loss of 0.6 dB, isolation of 20 dB isolation and VSWR of 1.30:1 max. Amplitude and phase unbalance are 0....

SMA Power Splitters Available in Small Package

February 25, 2009 10:46 am | Product Releases | Comments

Mini-Circuits' ZX10 SMA power splitters measure 0.74Ω × 0.90Ω × 0.54Ω. The unibody-constructed components operate in laboratory production and system environments over frequencies from 2 MHz to 12.60 GHz. The devices present typical isolation from 20 to 23 dB, typical insertion loss above 3 dB from 0....

Advertisement

Broadband Baluns Target Semiconductor Tuner Applications

February 25, 2009 10:46 am | Product Releases | Comments

Anaren's B0080K7575A00 75-Ω and B0080K5050A00 50-Ω 1:1 broadband baluns meet the requirements of OEMs developing mobile and non-mobile broadcast technology based on next-generation semiconductor tuners. Applications include TV sets, mobile TV, cable/terrestrial TV converters, PDAs and mobile handheld devices offering TV reception from terrestrial transmissions....

Circulator Covers 1,000 to 2,000 MHz Band

February 25, 2009 10:46 am | Product Releases | Comments

Raditek's RADC-1000-2000M-N23-200WR-b octave band circulator performs from 1,000 to 2,000 MHz. The 78.4 × 77 × 21.2 mm device delivers 75 W forward power and reverse power of 1, 5, 10, 20 or 25 W. The RoHS-compliant circulator exhibits typical insertion loss of 0.4 dB, typical isolation of 20 dB and typical VSWR of 1....

Coupler Functions in GaN MMIC Devices

February 25, 2009 10:46 am | Product Releases | Comments

Innovative Power Products' Model IPP-4011 transforming 90º hybrid coupler combines two signals of up to 300 W CW total output power in GaN MMIC devices with 25 W input and output impedances. The 2.20Ω × 0.80Ω × 0.23Ω drop-in-style-packaged device offers two ports at 50 ? impedance and two ports at 25Ω impedance....

High Current Inductor Features an Ultra-Low Profile

February 25, 2009 10:46 am | Product Releases | Comments

Vishay Intertechnology, Inc. announces its Model IHLP-2020BZ-11 low-profile, high-current inductor in the 2020 case size. The compact inductor offers an ultra-low 2 mm profile, with a wide inductance range and low DCR. With a frequency range up to 1 MHz, the IHLP inductor serves as a high-performing, space- and power-saving solution for voltage regulator module (VRM) and DC/DC converter applications in end products, including next-generatio...

Flat-Pack Noise-Immune Sensor for Level Applications

February 25, 2009 10:46 am | Product Releases | Comments

Turck, Inc. introduces its Model BCF10 noise immune, easy-to-apply capacitive sensor for level applications. The sensor's small size makes it more flexible for mounting in level applications, and it has the ability to detect liquids with high concentrations of chlorides such as soaps and cleaners. In applications where a detergent high in chlorides is used, the detergent leaves a film or etch on the inside wall of the container....

PA Duplexers Simplify Multi-Band CMA Phone Designs

February 25, 2009 10:46 am | Product Releases | Comments

TriQuint Semiconductor, Inc. announces its TRITIUM II PA-Duplexer Module family, a system of RF modules for mobile handset manufacturers. This family supports the CDMA 2000 (EV-DO) protocol with the PCS, cellular and AWS bands. Included in the product family are the TQM663029A, (PCS band), the TQM613029 (cellular band) and the TQM653029 (AWS band)....

Signal Conditioners Support Universal Input and Easy Programming

February 25, 2009 10:46 am | Product Releases | Comments

Red Lion Controls, Inc. introduces its IAMS series of universal signal conditioners. These DIN rail mounted signal conditioners provide complete isolation and conversion capability to satisfy almost any application. The universal input can accept RTD, TC, Ohm, potentiometer, mA, VDC and process input signals, allowing the units to be connected to most common sensors....

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading