RF Micro Devices, Inc. (RFMD) has released the RF6460, an integrated and scalable 3G/4G cellular front end platform. The RF6460 front end platform features an ultra-compact "converged" multi-band, multimode architecture (2G/2.5G/3G/4G) that delivers best-in-class efficiency, eases implementation, shrinks solution size and reduces component placements, versus mode-specific and band-specific architectures.
LX5551 and LX5552 from Microsemi Corporation are front-end modules (FEMs) for IEEE 802.11b/g/n applications in the 2.4 to 2.5 GHz frequency range. Addressing small form factor requirements driven by portable devices featuring WiFi connectivity, both modules are offered in a low-profile 3 x 3 mm 16-pin MLPQ package.
ETS-Lindgren introduces a portable RF shielded test cell, Model 5247, for making wireless device design verification and over-the-air performance measurements. At 35.5"(L) x 35.5"(W) x 84"(H) with rolling casters, the test cell can be easily moved between locations for design verification, pre-certification, and production line measurement applications.
Fairchild Semiconductor brings power supply designers a boundary-conduction mode (BCM) interleaving power factor correction (PFC) controller that provides over 96% power conversion efficiency for AC/DC power supplies. Historically, the higher-efficiency and lower-cost BCM PFC converters are limited to about 300 W of maximum power level.
Laird Technologies, Inc. has released two new dual-band external MIMO antennas the S245112PT Directional and the S24517PT Sector. Both antennas are specifically designed to enhance the latest generation of Wireless LAN (WLAN) technology systems and make use of MIMO technology in which multiple wireless transmitters and receivers operate simultaneously.
Freescale has developed advanced, ultra-low-voltage DC/DC converter technology that enables industry-leading solar cell startup and operating performance and efficiency at levels as low as 0.32 V, as well as operation down to 0.25 V. Most ICs cannot start up at voltages less than the typical turn-on voltage of a transistor (approximately 0.
By Svenn-Tore Larsen, Chief Executive Officer, Nordic Semiconductor Like many organizations in today's electronics sector, my company, Nordic Semiconductor, is rising to the challenge of operating in a global semiconductor market that analysts say could drop by around 20 percent this year compared to 2008.
AVX Corporation has developed a component modeling and simulation software that can save cost, time to market and reduce potential quality issues. Designated AVX Component Simulator, the software enables designers to view all basic characteristics and parameters for Accu-P, Accu-L, Thin Film Low Pass Filters, Couplers, 3dB Splitters, Hi-CV SMT, LICC, LGA and IDC products.
Providing design engineers with a 3W-rated resistive component that requires minimal PC board space, TT electronics IRC has extended the resistance range and voltage rating of its highest power dissipation chip resistor. The SC-3 Series resistor, a 3 W device in a 1 W (1225) chip size, now features a resistance range from 1 up to 100K, with power dissipation of 3 W @70° C, and a maximum voltage rating increase from 50 to 100 V.
California Micro Devices announces the CM1693 family of advanced EMI (electromagnetic interference) filters based upon the company's Praetorian III® LC based filtering technology. The CM1693 meets exacting EMI filter and ESD (electrostatic discharge) protection requirements while offering the low line capacitance necessary for the increasingly higher speed data interfaces to the high resolution cameras and displays used in today's most popular feature and smart phone models.
Planar Monolithics Industries, Inc. produces a variety of detector, amplifier and integrated products which operate up to 20 GHz. The PMI Model No:TDC-18T-204F covers from 2.4 to 2.5 GHz (other frequency ranges available). It is a high speed, adjustable, low loss coupler-detector with the output optimized to operate over 2.
The A2 Series from CIT Relay & Switch is small in size and light weight. Offering both PCB pin and .250 Quick Connect terminals, the A2 is available with a weatherproof shroud along with mounting flange and metal bracket options. Coil voltage options are 6, 12 and 24 VDC with coil power choices of 1.
By considering packaging in the early stages of product development, design teams can determine the best architecture for their particular application. By Ralph Ebbutt, Maxtek Components Corp. click to enlarge Figure 1 - An example of a system-on-chip (SoC) device.
Using advanced battery technologies to unlock the dynamic growth potential of remote wireless sensors used in "smart infrastructure" and related applications. By Sol Jacobs, Tadiran Batteries Contrary to all the recent economic news, the February 17, 2009 edition of The Wall Street Journal contained an upbeat article by Michael Totty entitled "Smart Roads.