|
|
Single Carrier FDMA in LTE
By Ram Asokan, Ixia
SC-FDMA is a new technology used for uplink in LTE. This article explores this technology, its use in LTE and its extension from OFDM.
Please click here to view the article
continue...
|
|
|
Challenges in Designing a New Modulation Scheme for LTE
LTE, or Long Term Evolution, is the latest mobile broadband standard and represents the start of the fourth generation of cellular communication systems. The downlink for LTE uses OFDMA modulation, which is a well understood technology from development of existing systems like WiMAX.
continue...
|
|
|
Network Operator Acceptance Testing of LTE Devices
The use of wireless devices, whether handsets or data cards, has increased substantially during the last few years. To accelerate device time-to-market and ensure customer satisfaction, many 2G/3G network operators have considered simulation tests in the lab as part of their acceptance programmes, and have established a device validation ecosystem with UE manufacturers and chipset vendors.
continue...
|
|
|
Wireless Sensor Networks Expand the Reach of Wireless Technology
Every day, smart devices are collecting more and more data from the world around us. Wireless technology continues to grow to meet an increasing demand for data, and it delivers a more efficient, more flexible solution with lower installation costs.
continue...
|
|
|
MIMO-Analysis for WiMAX, WLAN and LTE
Due to ongoing growth in demand for channel capacity, more and more radio standards such as WiMAX, 3GPP HSPA, 3GPP LTE and WLAN are adopting MIMO technology. Using MIMO it is possible to boost the data rate and achieve better transmission quality through simultaneous usage of multiple transmit and receive antennas.
continue...
|
|
|
The Role of Wideband Transceiver Technology in Enabling LTE
Long term evolution (LTE) is firmly on course to be the dominant wireless communications standard in the next decade. There is overwhelming operator commitment to adopting the LTE standard and capitalising on the unquestionable benefits it will bring to their subscribers, even more so than was demonstrated for its 3G predecessors.
continue...
|
|
|
Introduction to LTE Base Station RF Conformance Testing
The successful deployment of 3GPP Long Term Evolution (LTE) depends in large part on the compatibility and effective interworking of the system's different elements. Conformance testing ensures that these elements meet a minimum level of performance as defined in the 3GPP specifications.
continue...
|
|
|
The Hidden Challenge of MIMO Test
Today, engineers can combine modern RF signal analyzers with a basic understanding of digital downconversion to produce a tightly synchronized MIMO measurement solution.
By David A. Hall, National Instruments
click to enlarge
Figure 1.
continue...
|
|
|
Bringing the Real World into the Lab for 4G Wireless Testing
Wireless receiver testing can be a frustrating undertaking due to the breadth of the technologies and the depth of technical detail involved. Conformance tests are mandatory, but are not meant to quantify or predict realistic mobile operation.
continue...
|
|
|
Challenges of LTE Basestation and Handset Testing
With the pressure on infrastructure equipment vendors to deliver quickly to market, structured, incremental and flexible test programs are essential for the development integration, verification and optimization of LTE infrastructure.
continue...
|
|
|
Radio Channel Emulation Challenges in 3GPP LTE
In recent years there has been a major change in the way people communicate. Now wireless connections are nearly everywhere. A wireless connection is subject to unpredictable phenomena and therefore is far more complex than a wired system.
continue...
|
|
|
Dual Channel MIMO Measurements for WiMAX™ Wave 2
Systems using Multiple-Input Multiple-Output (MIMO) configurations can provide higher data rates with improved spectral efficiency when compared to traditional Single-Input Single-Output (SISO) implementations. Characterizing and troubleshooting these advanced WiMAX systems often requires a dual-channel signal analyzer with channel estimation capability, a “matrix decoder” and an OFDM demodulator.
continue...
|
|
|
Testing LTE and WiMAX OFDM/MIMO-Based Systems
Mobile wireless systems have dramatically evolved over the past two decades. Commercial wireless networks in the early 1980s provided low-capacity, voice-only services, whereas, in today's world, a growing number of mobile wireless networks are evolving to support higher capacity throughput for data-hungry applications.
continue...
|
|
|
GPS Environmental Challenges Drive Common Test Practices
Geocaching involves discovering various "caches" whose coordinates can be found on the Web and whose contents are located all over the world. Several weeks ago, I joined hundreds of thousands of other GPS enthusiasts by trying my luck at geocaching for the first time.
continue...
|
|
|
The Development of a Standard Hand Phantom for Wireless Performance Testing: Part 2
An informal survey of advertised handsets on the market revealed that they could generally be separated into two categories by width. Devices between 40 to 56 mm wide included most mono-block or “candybar”, fold or “clamshell”, slider, and rotator devices having a telephone-style keypad
continue...
|
|
|
Testing Challenges of SDR's
Today’s communications industry has found it essential to be able to rapidly adapt their design methodologies in order to meet their customers’ ever increasing demands and expectations for more speed, range and reliability, all at a lower cost.
continue...
|
|
|
Developing a Standard Hand Phantom for Wireless Testing
A standardized hand phantom used together with the SAM head phantom for radiated performance testing mirrors real-world use. In the early '90s, the IEEE began working on a standardized model for the human head and upper torso for use in Specific Absorption Rate (SAR) testing of wireless devices.
continue...
|
|
|
User-Programmable FPGAs Improve Wireless Test Applications
As the proliferation of wireless standards continues, the idea of using software-defined measurement capability has become a necessity as opposed to a matter of preference.
continue...
|
|
|
Testing LTE
Emerging standards such as 3GPP Long Term Evolution (LTE) present a number of design and verification challenges for system engineers.
continue...
|
|
|
Testing MMS Functionality in Mobile Phones
Over the years, the mobile-phone usage model has changed quite dramatically. No longer is it used solely for its voice services. Instead, the mobile phone is now being used for a growing number of social and mobile, data-centric applications.
continue...
|
|
|
Simplify Spectrum/Signal Analyzer Selection with Five Key Considerations
Spectrum and signal analyzers can be a critical asset in wireless development and manufacturing. Understanding your specific design needs and functionality required can significantly ease the selection process.
continue...
|
